BUCKHORN WILDLIFE RESOURCE

SKINNING RACK INSTRUCTIONS

Place the legs into the brackets as far as they will go.

Drill through the wood posts, insert bolts with washers & nuts then tighten.

Normal legs 4" x 4" dressed, treated lumber, 10' long

Nail or screw a 2" x 6" brace to each set of legs approx. 2' from the top pf the bracket.
Place the horizontal member (dressed, treated 4" x 4" or 4" x 6") in the brackets between the legs, drill, bolt & tighten.

The horizontal member can be any length between 6' & 10' with 8' being the most common.

Nail or screw a 2" x 4" diagonal brace between the 2" x 6" leg brace & the horizontal member on each side
 
 
Website Builder